Email Us
420j1 stainless steel sheet

420J1 Stainless Steel Sheet

aisi 420 equivalent stainless steel: After quenching, it has high hardness and good corrosion resistance (magnetic). After quenching, the hardness of 420J2 stainless steel is higher than that of 420J1 steel (magnetic).

There are 44 equivalent materials for aisi 420 equivalent Stainless Steel. Generally, the quenching temperature of aisi 420 equivalent is 980~1050℃, the hardness of 980℃ heating oil quenching is obviously lower than 1050℃ heating oil quenching, the hardness after 980℃ oil quenching is 45-50HRC, and the hardness after 1050℃ oil quenching is 2HRC higher. However, the grains of the structure obtained after quenching at 1050°C are coarse and brittle. It is recommended to use 1000℃ heating and quenching to get better structure and hardness.


420J1 Stainless Steel Sheet Specification

ItemStainless Steel 420J1 sheet (Hot rolled, Cold rolled)
Thickness0.3~10.0mm aisi 420 equivalent
Width1000mm, 1219mm, 1500mm, 1800mm,
2000mm, 2500mm, 3000mm, 3500mm, etc
Length2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc.
StandardJIS, AISI, ASTM, GB, DIN, EN, etc
Surface2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sand blast, Brush, etching, etc
PackageShrink-wrapped, Carton boxes, Wooden pallets, Wooden boxes, Wooden crates Etc.
EdgeMill Edge Slit Edge aisi 420 equivalent
Export toIndia, Indonesia, Malaysia, Singapore, Saudi Arabia, Qatar, UAE, Iran, Iraq, Oman, South Africa, Nigeria, Kenya, Italy, UK, Brazil, Russia, Egypt, Kuwait, Taiwan, Australia.

Chemical Elements Of 420j1 Stainless Steel Sheet


Processing Service Of Our 420j1 Stainless Steel Sheet

  • Cutting+Slitting - 420J1 stainless steel narrow strip,special length/width plate

(1) Flame cutting aisi 420 equivalent: The cost of flame cutting equipment is low and it is the only economical and effective means to cut thick metal plates, but it has its shortcomings in thin plate cutting.

(2) Laser cutting aisi 420 equivalent:Laser cutting equipment can cut stainless steel plates below 30mm. Adding oxygen to the laser beam can cut 40mm thick carbon steel, but after oxygen cutting, a thin oxide film will be formed on the cutting surface.

(3) Wire cutting aisi 420 equivalent: It is developed on the basis of EDM perforation and forming. It has not only developed the application of EDM but also replaced EDM perforation and forming in some aspects.

(4) Shearing cutting aisi 420 equivalent:Uses a moving upper blade and a fixed lower blade and uses a reasonable blade gap to apply shearing force to metal plates of various thicknesses so that the plates can be broken and separated according to the required size. Shearing machine is a kind of forging machinery, and its main function is the metal processing industry.

(5) Plasma cutting  aisi 420 equivalent:It is a processing method that uses the heat of a high-temperature plasma arc to partially or partially melt (and evaporate) the metal at the incision of the workpiece and uses the momentum of the high-speed plasma to remove the molten metal to form an incision.

(6) Slitting aisi 420 equivalent: Also known as slitting, refers to the process of uncoiling, slitting, leveling, and winding of stainless steel coils into coils of the required width.

  • Surface processing - 8K mirror, HL hairline, color coating

  • Bending+Welding - OEM customized products as drawing

Application Of 420j1 Corrosion Resistant Stainless Steel Sheet

420J1 Stainless Steel sheet Used in Tractor
420J1 Stainless Steel sheet Used in Automotive Trim
420J1 Stainless Steel sheet Used in Stamped Machined Products
420J1 Stainless Steel sheet Used in Stamped Machined Products
420J1 Stainless Steel sheet Used in Cookware
420J1 Stainless Steel sheet Used in Appliances
420J1 Stainless Steel sheet Used in Kitchen
420J1 Stainless Steel sheet Used in Foodservice Equipment
420J1 Stainless Steel sheet Used in Sinks
420J1 Stainless Steel sheet Used in Railway Cars
420J1 Stainless Steel sheet Used in Trailers

420J1 Stainless Steel Sheet Processing

  • 420J1 Stainless Steel Sheet Cutting

  • 420J1 Stainless Steel Sheet Slitting

  • 420J1 Stainless Steel Sheet Color coating

  • 420J1 Stainless Steel Sheet Hairline/Brush

  • 420J1 Stainless Steel Sheet Etching

  • 420J1 Stainless Steel Sheet Welding

  • 420J1 Stainless Steel Sheet Bending

  • 420J1 Stainless Steel Sheet Embossing

  • 420J1 Stainless Steel Sheet Bead Blasted

  • 420J1 Stainless Steel Sheet Polishing

420j1 Stainless Steel Sheet Stock Available

Tisco Stainless Steel 420J1 sheetStainless Steel 420J1 sheetJindal Stainless Steel 420J1 sheet
SS 420J1 Perforated sheetA 240 420J1 sheetSS DIN 1.4571 sheet
Stainless Steel 420J1 UNS S31635 sheetSS 420J1 Embossed sheetThyssenKrupp Stainless Steel 420J1 sheet
A 240 Chequered 420J1 sheetOutokumpu SS 420J1 sheetASTM A240 Stainless Steel 420J1 sheet
Aperam Stainless Steel 420J1 sheetSA 240 420J1 Stainless Steel sheetSurface Polishing SS 420J1 sheet
420J1 Stainless Steel HR sheetBright Hammered Pattern Decorative SS 420J1 sheet420J1 Stainless Steel Blank sheet
420J1 Stainless Steel Chequered sheet420J1 Stainless Steel CR sheet420J1 Stainless Steel Perforated sheet
420J1 Stainless Steel Golden Laser Pattern sheet420J1 Stainless Steel 2B sheetEmbossed ss 420J1 sheet
Super thin-Mirror surface BA ss 420J1 sheet420J1 Stainless Steel B. Q. Profile sheetsCheap cold rolled ss 420J1 sheet with best price
Super Austenitic SS 420J1 sheetBest selling 4'x8' mirror finished ss 420J1 sheetBrush finish ss 420J1 sheet price list
ASTM A240 420J1 sheetDecorative hairline inox cold rolled ss 420J1 sheetSS URANUS B6 420J1 sheet
JMSS cold rolled ss 420J1 sheetHair Line Finish SS 420J1 sheet2B SUS SS 420J1 sheet
Cold Rolled No.1 Finish SS 420J1 sheetLaser cutting ss 420J1 sheetFood Grade Stainless Steel 420J1 sheet
SEW 400 Stainless Steel 420J1 sheetTisco Supplier 3mm Thickness Stainless Steel 420J1 sheetNo. 4 PVC Coated SS 420J1 sheet
Hot Rolled Stainless Steel 420J1 sheetDecorative Stainless Steel 420J1 sheetSS 420J1 sheet Blasted Tin-Gold Rose
Sales Promotion SS 420J1 sheetScotch Brite SS 420J1 sheet2mm ASTM SS 420J1 sheet
Cr Stainless Steel 420J1 sheetBaosteel Stainless Steel 420J1 sheetStainless Steel Corrugated 420J1 sheet
SS 420J1 Mill Test Certificate sheetStainless Steel Cladding 420J1 sheetASTM B625 420J1 sheet
ASTM A240 420J1 sheetBlack SS 420J1 sheet 4mm ThickBrushed or dull polished Stainless Steel 420J1 sheet
Cold rolled, bright annealed 420J1 sheetBright-pickled Stainless Steel 420J1 sheetCold rolled, heat treated, pickled 420J1 sheet
Ground Stainless Steel 420J1 sheetCold rolled, heat treated 420J1 sheet10K Mirror Finish Surface SS 420J1 sheet
Hot Selling AISI SS 420J1 sheet3mm Cold Rolled AISI SS 420J1 sheetGold Etched SS 420J1 sheet
SS 420J1 Rose Golden sheetMill Supply SS 420J1 sheet18 Gauge SS 420J1 sheet
Surface coated Stainless Steel 420J1 sheetGrade Prime SS 420J1 sheetPatterned Stainless Steel 420J1 sheet
Satin finish Stainless Steel 420J1 sheetCarpenter Custom 450 Stainless Steel 420J1 sheetFinish Stainless Steel 420J1 sheet
AISI stainless steel 420J1 armor sheetCut to Size Stainless Steel 420J1 sheetPatterned Stainless Steel 420J1 sheet
Satin finish Stainless Steel 420J1 sheetNon Magnetic Polishing Stainless Steel 420J1 sheetPassenger Elevator Cabin SS 420J1 sheet
Mirror Finish SS 420J1 sheetASME SA240 420J1 sheetSS 420J1 sheet Gold Brush Finish

Get in Touch with SDO
We will contact you within 24 hours.
SDO always focuses on the research and development of high-standard Stainless Steel Products!
No. 120,Dongfang Material market, XiShan District, Wuxi City, Jiangsu Province, China