304 stainless tubing is the most widely used in a kind of chrome-nickel stainless steel, as a widely used steel. It has good corrosion resistance, heat resistance, low temperature strength and mechanical properties. Stamping, bending and other thermal processing are good and it has no heat treatment hardening phenomenon (use temperature -196℃ to 800℃). It is corrosion resistance in the atmosphere, and if it is an industrial atmosphere or heavily polluted area, it needs to be cleaned in time to avoid corrosion. 304 stainless tubing is suitable for food processing, storage and transportation, and 304 stainless tubing has good processing performance and weldability.
First 304 stainless tubing must prevent putting with chemicals of erosion effect in the case of preservation, and the leakage will cause corrosion and destruction of 304 stainless tubing.
304 stainless tubing in storage also need to prevent long-term immersion in water, stainless steel plate rust is very slow, but if the time and water contact will still affect the quality. The purpose of natural ventilation is to better prevent the 304 stainless tubing from being in the wet and cold gas for a long time, so that the moisture can be discharged immediately by natural ventilation. Nature in rainy days should do a good job of waterproof work.
304 stainless tubing itself has very high compressive strength, so it is generally used for stacking. But in the case of stacking, it also needs to follow a certain standard, otherwise it may cause the destruction of seamless steel pipe, or cause the same in the case of taking. The main criteria for stacking 304 stainless tubings are smoothness and safety. 304 stainless tubing stacking should be strengthened below the maintenance, it is best to pave the base made of wood, to prevent direct contact with the road, in addition to play a guarantee effect, prevent long-term on the other hand to the next layer of seamless steel tube deformation, but also can avoid the water storage on the ground caused by erosion of seamless steel tube. The height to width ratio of 304 stainless tubings should not be too high, otherwise it is very easy to improve the risk, at the same time, stainless steel factory is easy to produce higher working pressure on the next layer of seamless steel pipe, and then cause deformation.
304 stainless tubing durability is strong, not easy to produce aging condition, and many people are worried about the occurrence of 304 stainless tubing embrittlement. If this kind of situation has happened, the adverse effects will be very serious, because its application industry is very important. Therefore, the selection of stainless steel plate is not possible to have such concerns and produce aging conditions.